FLYSKY 9X WITH FRSKY X4R DHT(DIY) COMBO

Flysky 9x 2.4GHz 9CH Transmitter WITH RECEIVER FS-Th9X has revolutionized the way people experience RC, and now this radio transmitter can stand up to the top competitions.
AFHDS (automatic frequency hopping digital system), is developed by FLYSKY for all the Radio Control model lovers and is patented by FLYSKY at home. The system is specially developed for all the Radio control models, that offers super active and passive anti-jamming capabilities, very low power consumption and high receiver sensitivity. With extreme rigorous testing by engineers and studying the markets for years, FLYSKY AFHDS is now considered to be the one of the best systems available in the market.

2.4GHz is the standard of new generation radio system because it has a lot of advantages. Operating at 2.4 GHz puts the radio control out of the frequency range of any 'noise' generated by the other electronic components on your helicopter - such as the brushless motor, Electronic speed controller, Servos and any metal to metal noise - eliminating interference and glitching that can affect traditional frequency system.

Flysky 9x 2.4GHz 9CH Transmitter WITH RECEIVER Specifications for Flysky 9x 2.4GHz 9CH Transmitter WITH RECEIVER (1) channels: 9channels TH9X (2) model type: helicopter ,airplane, glider (3) RF power: less than 20db (4) modulation: GFSK (5) code type: PPM/PCM (6) sensitivity: 1024 (7) lcd type: 128*64 dot (8) low voltage warning: yes (9) DSC port: yes (10) charger port: yes (11) power:12VDC(1.5AA*8) (12) ANT length:26mm Included in the box: Transmitter 8CH Receiver R8B Binding plug Features of the Radio: Throttle curves Pitch curves Endpoint adjustments Subtrim Swash AFR mixes Servo reversing Timer Dual rate Exponential Flaperons V-Tail mixing Elevons FrSKY ACCST technology is proven, approved by many model associations, tested and reviewed as the leading Chinese 2.4Ghz R/C Technology. If you think DSM2 or FASST is the best, think again! The Two-way Radio System developed by FrSky provides an additional return link that would be used for monitoring the Rx’s voltage, temperature, location, speed and so on. Features: Advanced Continuous Channel Shifting Technology (ACCSTis our advanced tecnology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility. Easy to bind and very fast link-up. Excellent reboot time. True Diversity with two antennas. All channels can be programmed with Failsafe, quickly and easily. Quick and extremely stable in performance. Precise and smooth servo response. Extended range (1.5km-2.5km). Module specification: Operating voltage: 6.0V-13.0V (can handle 3S!) Power consumption: 50mA Output Power:: 60mW Resolution: 3072 (11bit) Dimensions: 55x34x8mm Included: 1 x DHT DIY Transmitter Telemetry module 1 x Transmitter Antenna Instruction Sheet Compatible with V8R4/V8R7-HV/V8R7-SP/V8FR-HV recievers in 1 way non-telemetry Mode. Compatible with D4FR/D6FR/D8R.D8R-II recievers in 2 way telemetry Mode. FrSky's X4R receiver features 4 PWM outputs (normal servo).  Plus the exciting new Smart Port and a traditional A2 port are all located on the side of the receiver. A FrSky FBVS can be connected to the A2 port for simple voltage monitoring as well as all of the Smart Port based sensors. Smaller than the X6R, but still packing the new Smart Port that works with the new hubless digital sensors. Note: This version of the X4R does not include the Sbus output. This is only a 4 channel receiver. No SBus and no CPPM output. Specification: Dimension: Weight: Operating Voltage Range: 4V-10.0V Operating Current: 100mA@5V Operating Range: >1.5km (Full Range) Firmware Upgradeable Compatibility: FrSky Taranis, Taranis Plus, & XJT module